Posts for tag: x-rays
X-rays are so interwoven into dental care that we often don't think twice about them. Even so, we shouldn't take this invisible form of radiation lightly—regular exposure at high levels can affect the human body, especially in children.
The ability of x-rays to pass through tissue greatly improves our ability to diagnose tooth decay and other dental diseases. But x-rays can also potentially harm those same tissues. Because children are more sensitive to x-ray energy, they run a greater risk for cellular damage that could lead to cancer later in life.
In reality, though, these potential risks from x-rays are extremely low—so low, in fact, dental professionals regard their use as altogether safe for children. Here's why.
The ALARA principle. Dentists and other healthcare providers perform x-ray diagnostics based on a principle known as ALARA (“As low as reasonably achievable”). This means dentists only utilize x-rays to gain the most diagnostic benefit at the lowest amounts of radiation exposure. As such, ALARA guides both the development of x-ray equipment and the protocols involved in using them.
Equipment advances. Today's x-ray devices are safer and more efficient, restricting x-ray emissions to a single beam without scattering radiation into the environment. A child's radiation exposure is further lowered with the use of digital x-rays, which produce images in less time than conventional film. Because of these and other advances, children are exposed to less radiation during x-rays than what they typically receive in a day from the outside environment.
Safe practices. Following the ALARA principle, dentists are quite conservative in their use of x-rays in children. The most common means of x-ray is the bitewing, which captures images primarily of the back teeth that are more prone to decay. Bitewings, which require a lower x-ray dosage than a full mouth x-ray, are usually spaced at least six months apart or longer depending on a child's risk for dental disease.
The efficiency of modern radiographic equipment coupled with their judicious use has drastically reduced the amount of x-ray radiation to which a child may be exposed, thus lowering their risk of future health issues. The benefit for saving a child's teeth from disease is well worth their use.
If you would like more information on x-ray safety, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Safety for Children.”
X-ray imaging is such an intricate part of dentistry, we usually don't think twice about it. Without it, though, the fight against dental disease would be much harder.
At the same time, we can't forget that x-rays are a form of electromagnetic radiation that can penetrate human tissue. It's that very quality and the difference in the absorption rate between denser bone and teeth and softer diseased tissue that makes disease diagnosis possible.
But this same penetrative power can potentially harm the tissues it passes through. For that reason when practicing any form of x-ray diagnostics, dentists follow a principle known as ALARA, an acronym for "As Low As Reasonably Achievable." In lay terms ALARA means getting the most benefit from x-rays that we can with the lowest dose and exposure time possible.
While practicing ALARA with x-rays is important for patients of any age, it's especially so for children who are more sensitive to radiological energy given their smaller size and anatomy. We can't use the same settings, dosages or exposure times with them as with an adult.
To protect children, dentists have developed techniques and protocols that lessen their exposure time and rate, while still providing usable images for diagnosing disease. The bitewing is a good example of safe and effective pediatric x-ray imaging.
A bitewing is a plastic device holding exposable film that patients bite down on and hold in their mouth while x-raying. The x-rays pass through the teeth and gums and expose the film behind them on the bitewing. Using a bitewing we can capture a set of two to four radiographs to give us a comprehensive view of the back teeth, while exposing the child less radiation than they normally receive daily from background environmental sources.
This and other advances in equipment and digital imaging greatly reduce the amount of radiation patients receive during x-rays. If, though, you're still concerned about your child's x-ray exposure, talk with your dentist who can explain in more detail the x-ray safety protocols they follow. Just like you, they want your child to be as safe as possible while still benefiting from the diagnostic power of x-rays.
If you would like more information on safety precautions using x-rays with children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Safety for Children.”
X-ray imaging is a routine part of a child's dental care — and it undeniably makes a difference in preventing and treating dental disease. It's so routine, we can easily forget they're being exposed to an invisible form of electromagnetic radiation.Â And just like other sources of radiation, too much x-ray exposure could increase the risk of cancer.
But while it's possible for your child to be over-exposed to x-rays, it's highly unlikely. That's because healthcare professionals like dentists adhere to a standard known as ALARA when considering and administering x-rays. ALARA is an acronym for “as low as reasonably achievable.” In other words, we only want to expose a patient to the lowest and safest levels of x-ray dosage and frequency that will achieve the most benefit.
To achieve that standard, professional dental organizations advocate the use of x-rays only after a clinical examination of the patient, as well as a thorough review of their medical history for any usage of x-rays for other conditions. If x-rays are warranted, we then take further precautions to protect the patient and staff, and only use the type of x-ray application that's absolutely necessary. For most children that will be a set of two or four bitewing radiographs, which are quite effective for detecting decay in back teeth.
This dosage of radiation in a session of bitewing radiographs is roughly a fifth of the background radiation in the environment a child may be exposed to every day. By spacing these sessions at least six months apart, we're able to achieve a high level of decay detection at a safe and reasonable amount of x-ray exposure.
On top of that, the digital advances in x-ray imaging have reduced the amount of radiation energy needed to achieve the same results as we once did with film. These lower exposure levels and the ALARA standard helps ensure your child's exposure to x-rays will be well within safe limits.
If you would like more information on the use of x-rays with children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Safety for Children.”
One of the most widely used forms of dental imaging is the bitewing x-ray. So called because of the shape of the device that holds the exposable film a patient clenches between their back teeth, the bitewing x-ray is an effective means for detecting the earliest stages of tooth decay.
These early signs are small lesions on a tooth surface caused by mineral loss in the enamel. While we can identify them on front teeth through visual examination or bright lighting, they’re nearly impossible to see on the biting surfaces of back teeth. The bitewing x-ray solves this problem.
During the procedure, a narrow beam of x-rays is directed at the back teeth area. Since X-rays can transmit through solid matter, they pass through the teeth and gums to expose the film attached to the bitewing assembly.
X-rays pass through matter at different rates depending on the density of the tissue — a slower rate for harder tissues like teeth and bone and a faster rate for soft tissues like the gums. As a result, x-rays through teeth expose less of the film and appear as a lighter image than the gums. This difference is so precise even a tooth’s softer dentin appears slighter darker than its harder outer enamel.
This precision helps us identify decay lesions. Because the lesions on the enamel are less dense than the normal enamel, they’ll appear as dark spots. By detecting them at this stage we have a better chance for reversing the effects of decay or at least minimizing damage that’s already occurred.
Because x-rays emit radiation, there’s a natural concern about over-exposure and we go to great lengths to reduce it. Children may undergo a bitewing x-ray twice a year for developing teeth, while adults with healthy teeth are typically x-rayed just once a year. Advances in digital film and other technology have also helped lower the exposure rate.
Today’s standard 4-film bitewing x-ray produces about four days worth of what we receive on average from normal background radiation, so the health risk is quite negligible. The benefit, on the other hand, is much greater — the early detection of tooth decay could ultimately save a tooth.
X-rays are an important diagnostic tool in dentistry because of their ability to penetrate and pass through body tissues. Because they penetrate at different speeds depending on tissue density (shorter and thus darker on exposed film for soft tissues, longer and lighter for hard tissues like bone or teeth), we’re able to detect decay which appear as dark areas on x-ray film.
Without x-rays, the early detection and diagnosis of dental problems would be quite difficult. But despite its obvious benefits, it’s still a form of released energy that exposes patients to a certain amount of radiation. Since the potential health risk from radiation depends on the amount released (the dosage) and for how long and often a person is exposed, we must determine if the dosage and frequency from dental x-rays is a cause for concern.
It’s a common misconception to view any radiation exposure as dangerous. The truth is, however, we’re all exposed daily to radiation from the natural environment — about 2 to 4.5 millisieverts (the dosage measurement for radiation exposure) a year, or about 10 microsieverts (one-thousandth of a millisievert) every day.
In comparison, radiation exposure from routine dental x-rays is a fraction of this if measured over time. A set of four bitewing images of the back teeth produces 4 microsieverts of radiation, less than half the average daily exposure. One of the most comprehensive x-ray sets, a full mouth series of 18-20 images using “D” speed film, results in an exposure of 85 microsieverts, equaling about a week of normal radiation exposure.
These thoroughly researched rates help demonstrate that regular dental x-rays are relatively safe. What’s more, x-ray technology has continued to advance since first used in the mid-20th Century. With innovations in film and digital processing, today’s equipment produces only 80% of the radiation exposure of earlier machines. In effect, we’ve increased our capabilities to more accurately detect and diagnose issues through x-rays, while lowering the amount of radiation exposure.
Of course, a person’s annual exposure rate may differ from others. If you have concerns for yourself or your family about x-ray radiation exposure, please feel free to discuss this with us. Our primary goal is to improve your oral health without undue risk to your health in general.
If you would like more information on x-ray diagnostics and safety, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “X-Ray Frequency and Safety.”